Table of Contents
Advertisement
3. Remove the jammed staples.
Remove the jammed staples with the supplied tool as shown in the
figure.
This tool can be found on the inside of the stapler unit cover.
4. Close the stapling section.
Press down on the stapling plate and return it to its original position.
Next, return the stapling section release lever to its original position.
Stapling section
release lever
5. Reinstall the stapler unit.
Reinstall the stapler unit in its original location using the mounting
screw to attach it tightly in place.
Then close the stapler cover.
Stapler
cever
Tool
Stapling plate
Stapler unit
Mounting
screw
6. Confirm that papers are stapled correctly.
Place a set of papers in the 2nd bin (below the non-sort bin), check
the stapling location, and then press the manual staple key when it
light up.
Next, remove the papers that were placed in the 2nd bin and confirm
that they have been stapled correctly.
At this time, if the papers still have not been stapled, repeat this
procedure once again.
Copy papers
Stapling location
Copy papers
This completes the staple sorter installation.
(4) SF-S16 (20-Bin sorter)
6 – 27
Copier
Advertisement
Table of Contents
