Sharp SF-2050 Service Manual page 30

3
Make a copy.
Check that "6" of UKOG-0162FCZZ is slightly copied. (0.5 of
UKOG-0089FCZZ is clearly copied.)
<When too light> Make the value displayed on the copy quan-
tity display smaller.
<When too dark> Make the value displayed on the copy quan-
tity display greater.
* The range of set values is 450 ∼ 800.
1 2 3 4 5
Not copied Slightly copied
4
When the copy density is within the specified range, press the
dark exposure key to set the manual exposure level to 5.
5
Make a copy.
Check that "2" of UKOG-0162FCZZ is clearly copied. (0.2 of
UKOG-0089FCZZ is clearly copied.)
<When too light> Make the value displayed on the copy quan-
tity display smaller.
<When too dark> Make the value displayed on the copy quan-
tity display greater.
* The range of set values is 450 ∼ 800.
1 2 3 4 5
Not copied Copied
(2) Toner save mode adjustment
1
Press the exposure select key to set to the manual density mode.
Press forward scroll key (→) and check that "1" (toner save mode)
is displayed on the LCD panel.
2
Make a copy.
Check that "6" of UKOG-0162FCZZ is slightly copied. (0.5 of
UKOG-0089FCZZ is clearly copied.)
<When too light> Make the value displayed on the copy quan-
tity display smaller.
<When too dark> Make the value displayed on the copy quan-
tity display greater.
* The range of set values is 450 ∼ 800.
1 2 3 4 5
Not copied Slightly copied
3
When the copy density is within the specified range, press the
dark exposure key to set to Photo mode 5.
4
Make a copy.
Check that "2" of UKOG-0162FCZZ (0.2 of UKOG-0089FCZZ) is
clearly copied.
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
<When too light>
<When too dark>
* The range of set values is 450 ∼ 800.
1 2 3
W
Not copied Copied
B. Photo mode adjustment
1
Press the exposure select key to set to the photo mode.
Check that "1" of the photo mode is displayed on the LCD panel.
2
Make a copy.
Check that "6" of UKOG-0162FCZZ is slightly copied. (0.5 of
UKOG-0089FCZZ is clearly copied.)
<When too light>
<When too dark>
* The range of set values is 450 ∼ 800.
1 2 3
W
Not copied
3
If the copy density is within the specified range, press the dark
exposure key to set to photo mode 5.
4
Make a copy.
Check that "2" of UKOG-0162FCZZ (0.2 of UKOG-0089FCZZ) is
clearly copied.
<When too light>
<When too dark>
* The range of set values is 450 ∼ 800.
1 2 3
W
Not copied Copied
C. Auto exposure (AE) mode adjustment
(1) Auto exposure (standard mode) adjustment
1
Press the exposure select key to set to the auto exposure mode.
2
Make a copy.
6 – 11
Make the value displayed on the copy quan-
tity display smaller.
Make the value displayed on the copy quan-
tity display greater.
4 5 6 7 8
Make the value displayed on the copy quan-
tity display smaller.
Make the value displayed on the copy quan-
tity display greater.
4 5 6 7 8
Slightly copied
Make the value displayed on the copy quan-
tity display smaller.
Make the value displayed on the copy quan-
tity display greater.
4 5 6 7 8
9 10 W
9 10 W
9 10 W