Sharp SF-2050 Service Manual page 39

Rail mounting plate screws Rail screws A
(M4 X 14): 2
Rail mounting plate screws
(M4 X 16): 2
Support guide: 1
Rail mounting plate: 1
Rail: 1
Sorter mounting plate: 1
Stapling location label A: 1
Sorter protection mat: 1
Rail screw B
(M4 X 6): 2 (M4 X 6): 1
Bracket screws
(M4 X 10): 2
Stapling location label D: 1
Green label: 1
Before installing
Be sure that you have plenty of room around the copier
for work space.
1.0m
Remove the securing fixtures
When performed on the skid
Remove the 2 securing fixtures.
When not performed on the skid
Open the sorter protection mat, as shown in the figure, and posi-
tion it against the sorter's caster. Lay the sorter down on the
protection mat.
Next, remove the 2 securing fixtures.
6 – 20
Securing fixtures
3
2
1
2