Table of Contents
Advertisement
(6) Change the paper size indication plate
Remove the paper size indication plate. Install the plate so the size of
the paper can be seen from the window.
Paper sizes are printed on the front and the back of the paper size
indicator plate.
(7) Set the cassette
Hold up both sides of the cassette from back and insert it along the
guide rails. Ensure the cassette moves in and out smoothly.
Guide rail
Guide
(8) Load paper
Load paper in the cassette, but not above the maximum line.
Insert the cassette all the way into the machine.
Line indication label
8. Developer supply
(1) Developing unit removal
1
Open the front cover of the copier.
Paper size indication scale
Guide rail
Guide
2
Push the developing unit pressure lever down to separate the
developing unit from the drum.
3
Slowly pull out the developing unit until it is stopped by the lock
4
Press the DV stopper to release the lock.
5
Hold the DV handle to remove the unit from the copier.
(2) Developer supply
1
Remove four screws of the DV joint of the developing unit.
2
Supply developer.
6 – 7
Advertisement
Table of Contents
