Sharp SF-2050 Service Manual page 107

Main Sub
Item
code code
2 Jam counter display
Contents
Page. 1
SIMULATION NO. 22-1
TOTAL : nn, nnn, nnn
MAINTENANCE : nn, nnn, nnn
COPIES : nn, nnn, nnn
DEVELOPER : nn, nnn, nnn
RADF : nn, nnn, nnn
STAPLER : nn, nnn, nnn
↓ SCROLL KEY on ↑
Page 2
SIMULATION NO. 22-1
BYPASS : nn, nnn, nnn
CASSETTE 1 : nn, nnn, nnn
CASSETTE 2 : nn, nnn, nnn
CASSETTE 3 : nn, nnn, nnn
CASSETTE 4 : nn, nnn, nnn
LCC : nn, nnn, nnn
DUPLEX : nn, nnn, nnn
When the sub code is entered, the LCD shows the following
display to allow selection of the jam counter display.
SIMULATION NO. 22-2
SELECT JAM COUNTER. (1~2)
1. MACHINE 2. RADF
1. Machine jam counter
When "1" is selected in the above message and the START
key is pressed, the machine total jam count is displayed on the
LCD. When, with the machine total jam count displayed, the
information (*) key is pressed, the LCD shows the jam cause
display, where the latest 10 jam causes (max. 20 pages) are
displayed in the order from the latest. To change the page of
the jam cause display, press the scroll (→) key.
When the information key is pressed with the jam cause dis-
play displayed, the LCD returns to the machine total jam count
display.
9 – 14
1/2 →
1/2 →
nn, nnn, nnn: Counter value
Adjustment value
Ref. page
Adjustment
Default
scope
— — —