Table of Contents
Advertisement
Main
Sub
Item
code
code
4
Void adjustment
value input
51
Contents
LCD DISPLAY
COPY QUANTITY DISPLAY
*
* *
: Distance from MHP to image lead edge (1 count = 0.47mm)
INPUT_A (0~99)
SCROLL KEY
* * *
: Time data from image lead edge to PSC ON (1 count = 0.5ms)
INPUT_B (0~99)
SCROLL KEY
* * *
:
INPUT_C (1~20)
SCROLL KEY
* * *
: Lead edge void amount data(1 count = 0.47mm)
INPUT_D (0~20)
SCROLL KEY
* * *
: Read edge void amount data (1 count = 0.47mm)
INPUT_E (0~20)
Note 1: ( ) shows the input range of adjustment value.
Note 2: When "0" is entered to "50C," the adjustment is
similar to that of "10."
When the sub code is entered, the LCD shows the following
display and the currently set value of "50D" (lead edge void
amount) is displayed on the copy quantity display. With the
RPL on, enter the set value with the 10-key pad and press the
START key to store it.
SIMULATION NO. 50-4
INPUT_D (0~20)
Press the scroll key ( → ) to scroll the message display on the
LCD and the copy quantity display as follows:
50E → 50D → 50E →
The set value can be stored or changed in the same manner
as in "50D."
LCD DISPLAY
COPY QUANTITY DISPLAY
*
* *
: Lead edge void amount data (1 count = 0.47mm)
INPUT_D (0~20)
SCROLL KEY
* * *
: Rear edge void amount data (1 count = 0.47mm)
INPUT_E (0~20)
SCROLL KEY
Note 1: ( ) shows the input range of adjustment value.
When the main code is inputted, the LCD shows the following
display and a sub code blinks on the copy quantity display.
With the RPL on, enter the desired sub code and press the
START key to start the operation.
SIMULATION NO. 51
INPUT 1~6
1. PSPS TIMING ADJUSTMENT.
2. RRC PAPER BUCKLE ADJUSTMENT.
3. RRC PAPER BUCKLE ADJUSTMENT. (INPUT)
4. TRC2H OFF TIMING ADJUSTMENT. (INPUT)
5. RRC PAPER BUCKLE REVISION.
(BYPASS TRAY; 5.5 × 8.5, A5)
5.
6. RRC PAPER BUCKLE REVISION. (INPUT)
(BYPASS TRAY; 5.5 × 8.5, A5)
6.
9 – 35
Adjustment value
Default
ON
ON
ON
ON
—
ON
ON
Ref. page
Adjustment
scope
—
—
Advertisement
Table of Contents
