Table of Contents
Advertisement
Be sure to connect the grounding wire.
If not, a leak current may cause a fire or an electric shock. For
grounding, consult the distributor.
Do not remove the cabinet of the copier. There are high voltage
sections, which may cause electric shocks.
Do not touch the power plug with a wet hand. It may cause an electric
shock.
Do not remodel the copier. It may cause a fire or an electric shock.
Avoid installation to an uneven floor, an unstable surface, or a tilted
surface. It may be dangerous.
Be sure to install the copier to a solid, flat place horizontally.
(The copier weight: about 131kg.)
Ground terminal
6 – 3
3. Fixing the copier with the adjuster
1
Move the copier to the installing position.
2
Turn the adjusters clockwise so that they make in contact with the
floor, and fix the copier.
Lock
Adjuster
4. Optical system lock release
1
Lens unit lock release: Open the front cover and remove the lens
unit lock screw.
2
No. 4/5 mirror base unit lock release:
Open the front cover and remove the No.
4/5 mirror base lock screw.
1
2
3
No. 2/3 mirror base unit lock release:
Remove the lock screw in the supper side
of the left cabinet.
Release
Advertisement
Table of Contents
