Table of Contents
Advertisement
Main
Sub
Item
code
code
2
LCC paper size
setting (Except for
SEC and SECL)
3
Auditor/coin vendor
setting
5
Counter mode
setting
Contents
When the sub code is entered, the LCD shows the following
display and the currently set value (paper size) is displayed on
the copy quantity display.
With the RPL on, select the code according to the installed
LCC and press the START key. Then the paper size in the
LCC is stored.
SIMULATION NO. 26-2
SELECT LCC TYPE.
0. NO LCC
1. 8.5"×11" (216×279)
2. A4
3. B5
When the sub code is entered, the LCD shows the following
display and the currently set value is displayed on the copy
quantity display.
With the RPL on, select the code according to the installation
state of the auditor/coin vendor and press the START key.
Then the setting is stored.
SIMULATION NO. 26-3
INPUT 1~4
1.P10
2.SF-EA11/12
3.COIN VENDOR
4.OTHER
Code
Display
P10
Internal auditor. When dept.
1
control is not performed
(default).
SF-EA11/12
When the external auditor
2
SF-EA11/12 is used.
COIN VENDOR
When the coin vendor is
3
connected.
OTHER
When other dept. control device
4
is used.
When the sub code is entered, the LCD shows the following
display and the code of the currently set counter mode is dis-
played on the copy quantity display.
With the RPL on, select the code and press the START key.
Then the setting is stored.
SIMULATION NO. 26-5
COUNTER MODE SETUP
CODE
TOTAL COUNT
0
DOUBLE COUNT
1
SINGLE COUNT
2
DOUBLE COUNT
3
SINGLE COUNT
PLEASE SELECT BY
10-KEY PAD.
9 – 21
Content
MAINTE COUNT
DOUBLE COUNT
DOUBLE COUNT
SINGLE COUNT
SINGLE COUNT
1
2
3
4
5
6
7
8
9
Adjustment value
Ref. page
Adjustment
Default
scope
0 ∼ 3
0
P. 6 – 9
1 ∼ 4
—
—
0 ∼ 4
—
—
Advertisement
Table of Contents
