Table of Contents
Advertisement
Main
Sub
Item
code
code
27
01
02
Contents
When main code 27"" is entered, the following LCD screen is
displayed.
SIMULATION NO.27
INPUT 1-5
1.DISABLING OF U7-00 TROUBLE
2.PC/MODEM DATA CHANGE.:TEL #
3.PC/MODEM DATA CHANGE.:ID #
4.SERVICE START/END REPORT.
5.TAG NUMBER SETTING.
During execution, the following message is displayed on the
basic screen, allowing setting of communication trouble (U7-
00).
SIMULATION NO.27-1
DISABLING OF U7-00 TROUBLE
0. YES
1. NO
When "0" is selected, the machine is not stopped even when
PC/MODEM communication trouble occurs.
When "1" is selected, the machine is stopped when
PC/MODEm communication trouble occurs.
During execution, the following message is displayed on the
basic screen, allowing setting of the host computer telephone
number.
Use the 10 key pad to enter the host computer telephone
number.
SIMULATION NO.27-2
SELECT HOST NUMBER TO CHANGE DATA.
1.HOST1
2.HOST2
(When "1" is selected;)
The following message is displayed in the basic screen.
SIMULATION NO.27-2
SELECT TEL TO CHANGE DATA. [HOST1]
1.TEL1
2.TEL2
3.TEL3
Use the 10 key to set the telephone number. When "1" is
pressed, for example, the following message (A) message (B)
are displayed.
SIMULATION NO.27-2
HOST1 TEL1:••••••• (A)
SIMULATION NO.27-2
HOST1 TEL1: ******(1)****** ← 24 digits
– – – CHANGE DATA: 1. YES 2. NO ••••••• (B)
(Note) (1) ••••••• Registered telephone number
When "1.YES" is selected with message (B) displayed, the
following message is displayed to allow entering a new
telephone number.
SIMULATION NO.27-2
HOST1 TEL1: *:[*];#:[→];, ; [P]
:*******(2)***** ← 24 digits
NEW DATA
(Note) (2) ••••••• Telephone number to be newly registered.
After completion of input, communication with the Modem is
effective, and when the PRINT switch is pressed, the following
message is displayed, allowing checking of the registered
telephone number.
SIMULATION NO.27-2
HOST*TEL1:*******(2)***** ← (24 digits)
(When 2, 3, or 4 is selected:)
Telephone number can be set similarly to 1.
9 – 23
3.HOST3
4.HOST4
4.TEL4
Adjustment value
Ref. page
Adjustment
Default
scope
—
—
—
—
—
—
Advertisement
Table of Contents
