Sharp SF-2050 Service Manual page 47

Caster unit
(1 pc.)
Bracket mounting Sorter seat mounting
screws (2 pcs.) screws (2 pcs.)
Unplug the copier and follow the procedure below.
1. Switch the sorter seat.
Remove the stoppers (2) attached to the sorter seat and refer to the
illustration to install in their place the stoppers (2) which come packed
with this sorter.
As shipped
from factory
Sorter seat
(1 pc.)
Stoppers (2 pcs.)
Support guide
Sorter seat mounting
screws (2 pcs.)
Mounting
Stopper
screws
Mounting
screws
Stopper
For SF-2050
B
2. Install the support guide.
Hook the pawls (two locations) of the support guide to the inside of
the copier paper exit end to install the guide as shown in Fig.
3. Mount the sorter seat to the desk.
Remove the two cut-outs in the cabinet panel on the left side of the
desk.
Cut-out
Secure one of the two sorter seat mounting screws to the back of the
copier and hook the sorter seat onto it as shown in the illustration.
Next, use the other sorter seat mounting screw to secure the sorter
seat.
Sorter seat mounting screw
Sorter seat
Sorter seat
Sorter seat
mounting screw
6 – 28
Setting switch lever
For SD-2060
A
Support guide
Cut-out