Table of Contents
Advertisement
3. Reinsert the staple cartridge.
Push the staple cartridge in horizontally until it clicks securely into
place.
Then close the stapler cover.
Staple cartridge
Stepler cover
4. Confirm that papers are stapled correctly.
Place a set of papers in the 2nd bin (below the non-sort bin), check
the stapling location, and then press the manual staple key when it
lights up.
Next, remove the papers that were placed in the 2nd bin and confirm
that they have been stapled correctly.
At this time, if the papers still have not been stapled, repeat this
procedure once again.
Copy papers
Stapling location
Copy papers
This completes the staple sorter installation.
If staples have become jammed
1. Remove the stapler unit.
Open the stapler cover and loosen the mounting screw that secures
the unit in place until there is no more resistance.
Next, remove the stapler unit.
Stapler
cover
2. Open the stapling section.
Open the stapling section by pushing up on the stapling plate while
pressing on the stapling section release lever.
Copier
6 – 26
Stapler unit
Stapling section release lever
Stapling plate
Mounting
screw
Advertisement
Table of Contents
