Table of Contents
Advertisement
3 Technical Data
CANopen System data
Transmission medium
Max. length of fieldbus
Baud rate
Buscoupler connection
CANopen Device Data
Number of PDO
Number of SDO
Communication profil
Device profil
COB ID Distribution
Node ID Distribution
Further CANopen Device Features NMT Slave
Supply
Supply voltage
Current input
(Module without load)
Total loss of power
Fuse F1 for sensor supply
General information
Dimensions W x H x L
Housing material
Fixing
Fitting position
Weight
Fieldbus Dependent I/O Module
CANopen
Shielded Cu Cable
40 m ... 1000 m (depends on baud rate /on the cable)
10 kBaud ... 1 MBaud
1 x D-SUB 9 (752-828)
1 x MCS (752-827), Connector (231-305/010-
000/050-000) is included
2 Tx / 2 Rx
1 Server SDO
DS-301
DS-401
SDO, Standard
DIP Switch
Minimum Boot-up
Variables PDO Mapping
Emergency Message
Life Guarding
DC 24 V (– 15 % / + 20 %)
< 150 mA at 24 V DC
< 4,5 W
TR5 250 V / 6,3A T
Note: Use UL-Recognized fuse only
*
(155 x 129 x 60
) mm
Polycarbonat
Snap mounting onto 35 DIN carrier rail
EN 50022-35
vertical and horizontal
approx. 500 g
*
from upper edge of DIN 35 rail
Technical Data
• 7
Advertisement
Table of Contents
