Led Display When Alarm Or Warning Occurs - Mitsubishi MELDAS MDS-C1 Instruction Manual

6-1-1

LED display when alarm or warning occurs

(1) Servo and spindle drive unit
The axis No. and alarm/warning No. alternate on the display. The display flickers when an alarm
occurs.
F1 (flicker)
F+axis No.
F1
F+axis No.
No. 0 1
LED
display
(2) Power supply unit
The alarm/warning No. is converted into a symbol and displayed. Refer to section "6-3-1 List of
alarms" and "6-3-2 List of warnings" for details. The display flickers when an alarm occurs.
LED display during power
6. Troubleshooting
25 (flicker)
Alarm No.
LED display during servo alarm or spindle alarm
E7
Warning No.
LED display during servo warning or spindle warning
Numbers displayed on LED
2 3 4 5
Alarm 71 (flicker)
supply alarm
F2 (flicker) 37 (flicker)
F+axis No. Alarm No.
F2 9F
F+axis No. Warning No.
6 7 8 9 A
Warning E9
LED display during power
supply warning
6 - 3
Not lit
Not lit
B C D E F