Mitsubishi MELDAS MDS-C1 Instruction Manual page 59

(4-2) Connection for full-closed synchronous control
(when using MDS-C1-V2 drive unit and analog output linear scale)
Linear scale
Parameter settings
No. Abbrev. Parameter name
SV025 MTYP Motor/detector type
2. Wiring and Connection
MDS-C1-V2
CN3L
CN2L
CN2M
Set the detector type. (Refer to Chapter 3 Setup for details)
Master axis
Slave axis
2 - 26
CN2
CON4 CON3
Detector
Converter
unit
MDS-B-HR
CON2 CON1
Description
Speed command synchronous control : A0xx or A1xx or A2xx
Current command synchronous control : A0xx or A1xx or A2xx
Speed command synchronous control : D0xx or D1xx or D2xx
Current command synchronous control : DExx
Slave axis
Master axis
Detector cable
CNV12