Mitsubishi MELDAS MDS-C1 Instruction Manual page 321

MX13 Series 3-phase high attenuation noise filter (for FA & servo system)
Features
• Perfect for mounting inside control panel:
New shape with uniform height and depth
dimensions
• Easy mounting and maintenance work:
Terminals are centrally located on the
front
• Complaint with NC servo and AC servo
noise:
High attenuation of 40dB at 150KHz
• Safety Standards:
UL1283, CSA22.2 No.8, EN133200
• Patent and design registration pending
Specifications and standards
Item
1 Rated voltage (AC)
2 Rated current (AC)
Test voltage (AC for one minute across
3
terminal and case)
Insulation resistance (500VDC across
4
terminal and case)
5 Leakage current (250V, 60Hz)
6 DC resistance
7 Temperature rise
8 Working ambient temperature
9 Working ambient humidity
10 Storage ambient temperature
11 Storage ambient humidity
12 Weight (typ)
(Note) This is the value at Ta≤50°C.
Refer to the following output derating for Ta>50°C.
Output derating
Ambient temperature Ta (°C)
Appendix 3. EMC Installation Guidelines
Type
MX13030
(Note) 30A
3.5 mA max.
30 mΩ max.
2.8kg
A3 - 13
MX13050 MX13100
3-phase 250VAC (50/60Hz)
50A
2500VAC (100mA) at 25°C, 70% RH
100MΩ min. at 25°C, 70% RH
11 mΩ max. 5.5 mΩ max.
30°C max
–25°C to +85°C
30% to 95% RH (non condensing)
–40°C to +85°C
10% to 95% RH (non condensing)
3.9kg 11.5kg
Example of using MX13 Series
This is a noise filter with the same dimensions as
the general servo unit depth (200mm) and height
(380mm).
This unit can be laid out easily in the device by
arraigning it in a row with the servo unit.
As with the servo unit, the terminals are
arranged on the front enabling ideal wire
lead-out.
Refer to the following usage examples for
details.
MX13150
100A 150A
8 mA max.
3.5 mΩ max.
16kg