Panel Installation Hole Work Drawings (Panel Cut Drawings) - Mitsubishi MELDAS MDS-C1 Instruction Manual

1-3-4 Panel installation hole work drawings (Panel cut drawings)

Prepare a square hole to match the unit width.
2-M5 screw
Unit width: 60mm
Square hole
2-M5 screw
Unit width: 120mm
POINT
Square
hole
(Note 1)
52
(Note 1)
112
1. Attach packing around the square hole to provide a seal.
2. A square hole does not need to be machined on the MDS-C1-V1-10 or
smaller, MDS-C1-V2-1010 or smaller and MDS-C1-SP-15 or smaller units.
1. Installation
Square hole
2-M5 screw
Unit width: 90mm
Square hole
4-M5 screw
Unit width: 150mm
1 - 11
(Note 1)
82
60
(Note 1)
142
Unit [mm]