Table of Contents
Advertisement
Host Settings
SSH Username
Remote Address
Remote Port
To Configure Host Settings
Note:
The following section describes the steps to view and configure Host 1 settings;
these steps apply to other host instances of the device.
Using Web Manager
To configure a particular Host, click Host on the menu and select Host 1 -> Configuration.
Using the CLI
To enter the Host command level: enable -> config -> host 1
Using XML
Include in your file:
PremierWave® XC HSPA+ Intelligent Gateway User Guide
Description
Appears if you selected SSH as the protocol. Enter a username to select a pre-
configured Username/Password/Key (configured on the SSH: Client Users page),
or leave it blank to be prompted for a username and password at connect time.
Note:
This configuration option is only available when SSH is selected for
Protocol.
Enter an IP address for the host to which the device will connect.
Enter the port on the host to which the device will connect.
<configgroup name="host" instance="1">
11: Terminal and Host Settings
84
Advertisement
Table of Contents
Need help?
Do you have a question about the PREMIERWAVE XC HSPA+ and is the answer not in the manual?
Questions and answers