To Transfer Or Modify Filesystem Files; Protocol Stack Settings; Ip Settings; Table 16-5 Ip Protocol Stack Settings - Lantronix PREMIERWAVE XC HSPA+ User Manual

File Transfer Settings
TFTP
Action
Local File
Remote File
Host
Port
Transfer (button)

To Transfer or Modify Filesystem Files

Using Web Manager
To create a new file or directory, upload an existing file, copy or move a file, or view existing

files, click Filesystem in the menu and select Browse.
Using the CLI
To enter the Filesystem command level:

Using XML
Not applicable.


Protocol Stack Settings

There are various low level network stack specific items that are available for configuration. This
includes settings related to IP, ICMP, ARP and SMTP, which are described in the sections below.

IP Settings

Protocol Stack
IP Settings
IP Time to Live
PremierWave® XC HSPA+ Intelligent Gateway User Guide
Description
Select the action that is to be performed via TFTP:
Get = a "get" command will be executed to store a file locally.

Put = a "put" command will be executed to send a file to a remote

location.
Enter the name of the local file on which the specified "get" or "put" action is
to be performed.
Enter the name of the file at the remote location that is to be stored locally
("get') or externally ("put").
Enter the IP address or name of the host involved in this operation.
Enter the number of the port involved in TFTP operations.
Click the Transfer button after TFTP settings are entered.
enable -> filesystem
IP Protocol Stack Settings
Table 16-5
Description
This value typically fills the Time To Live in the IP header. SNMP refers to this
value as "ipDefaultTTL"
Enter the number of hops to be transmitted before the packet is discarded.
16: Maintenance and Diagnostics Settings
111