To Ping A Remote Host; Traceroute; To Perform A Traceroute; Table 16-9 Traceroute Settings - Lantronix PREMIERWAVE XC HSPA+ User Manual

Diagnostics: Ping
Settings (continued)
Timeout
Submit (Button)

To Ping a Remote Host

Using Web Manager
To ping a Remote Host, click Diagnostics in the menu and select Ping.

Using the CLI
To enter the command level: enable, ping <host> <count> <timeout>

Using XML
Not applicable.


Traceroute

Here you can trace a packet from the PremierWave XC HSPA+ intelligent gateway to an Internet
host, showing how many hops the packet requires to reach the host and how long each hop takes.
If you visit a web site whose pages appear slowly, you can use traceroute to determine where the
longest delays are occurring.
Diagnostics:
Traceroute Settings
Host
Protocol
Submit (button)

To Perform a Traceroute

Using Web Manager
To perform a Traceroute, click Diagnostics in the menu and select Traceroute.

Using the CLI
To enter the command level: enable, trace route <host>

Using XML
Not applicable.

PremierWave® XC HSPA+ Intelligent Gateway User Guide
Description
Enter the time, in seconds, for the PremierWave XC intelligent gateway to wait for a
response from the host before timing out. The default is 5 seconds.
Click the Submit button after entering ping information.

Table 16-9 Traceroute Settings

Description
Enter the IP address or DNS hostname. This address is used to show the path
between it and the PremierWave device when issuing the traceroute command.
Select the traceroute protocol from the drop-down menu.
Click the Submit button after entering traceroute information.
16: Maintenance and Diagnostics Settings
115