Table of Contents
Advertisement
Using the CLI
To enter the eth0 QoS command level: enable -> config -> if 1 -> qos
Using XML
Include in your file:
Network 1 (eth0) Failover
The PremierWave XC HSPA+ intelligent gateway provides Cellular WAN network failover, in the
form of a "dead remote host reachability" mechanism (essentially a ping against a known host). If
the remote host is determined to be not reachable, the device will failover to the Wi-Ficellular
interface. If the remote host is determined to be reachable, the device will failback to the Ethernet
interface.
Network 1 (Failover)
Settings
State
Failover Interface
Hostname
Method
Timeout
Interval
Failover Threshold
Failback Threshold
To Configure Network 1 Failover Settings
Using Web Manager
To modify Failover settings, click Network on the menu and select Network 1 > Failover >
Configuration.
Using the CLI
To enter the eth0 link command level: enable -> config -> if 1 -> failover
Using XML
Include in your file: <configgroup name="network failover" instance="eth0">
PremierWave® Intelligent Gateway User Guide
<configgroup name="qos" instance="eth0">
Table 6-5 Network 1 (eth0) Failover Settings
Description
Click to enable or disable state.
Always select wwan0 in the PremierWave XC HSPA+ intelligent gateway.
Enter the remote host to test reachability.
Select ICMP or TCP based ping.
Indicate the interval to wait for ping response from remote host.
Indicate the interval in which to test reachability
Indicate the allowed number of failed pings – after which the device will
failover to the cellular interface.
Indicate the number of successful pings – after which the device will failback
to the Ethernet interface.
6: Network Settings
43
Advertisement
Table of Contents
Need help?
Do you have a question about the PREMIERWAVE XC HSPA+ and is the answer not in the manual?
Questions and answers