Table of Contents
Advertisement
Adding New Static Route
Settings
Name
Network
Gateway
Interface
Metric
Add
To Configure Gateway Static Route Settings
Using Web Manager
To modify gateway static route information, click Gateway on the menu and select
Configuration > Static Routes.
Using the CLI
To enter the gateway command level: enable -> config -> gateway -> static
route <number>
Using XML
Include in your file: <configgroup name ="gateway"> <configitem name="static
routes" instance="<number>"
DHCP Server
Allows the user to configure the device as a DHCP server.
DHCP Settings
Lease time
State
Start IP Address
End IP Address
State
Start IPv6 Address
End IPv6 Address
PremierWave® Intelligent Gateway User Guide
Table 6-15 Adding a New Static Route
Description
Enter the user friendly name for the route.
Enter the Network or Host for the route.
Enter the Gateway for the route.
Select the Interface for the route.
Enter the priority for the route. Lower metric means higher priority.
Click Add after adding new route information.
Table 6-16 DHCP Settings
Description
Enter the duration for which lease is initially assigned. Clients must renew after this
duration.
Enable or Disable the DHCP server for the DHCP settings.
Enabled: DHCP server is enabled.
Disabled: DHCP server is disabled.
View or edit the Start IP Address of address pool.
View or edit the End IP Address of address pool.
Enable or Disable the DHCP server for the DHCPv6 settings.
Enabled: DHCP server is enabled.
Disabled: DHCP server is disabled.
Start IPv6 Address of address pool.
End IPv6 Address of address pool.
6: Network Settings
50
Advertisement
Table of Contents
Need help?
Do you have a question about the PREMIERWAVE XC HSPA+ and is the answer not in the manual?