Lantronix PREMIERWAVE XC HSPA+ User Manual page 36

Web Manager Page
(continued)
Discovery
DDNS
DNS
Email
Filesystem
FTP
Gateway
GRE
Host
HTTP
Line
Network
Protocol Stack
Query Port
Relay
RSS
SMS
SMTP
SNMP
SSH
SSL
Syslog
System
Terminal
Tunnel
Virtual IP
VPN
PremierWave® XC HSPA+ Intelligent Gateway User Guide
Description
Allows you to view and modify the configuration and statistics for device
discovery.
Alllows you to view and configure DDNS settings.
Shows the current configuration of the DNS subsystem and the DNS
cache.
Shows email statistics and lets you clear the email log, configure email
settings, and send an email.
Shows file system statistics and lets you browse the file system to view a
file, create a file or directory, upload files using HTTP, copy a file, move a
file, or perform TFTP actions.
Shows statistics and lets you change the current configuration for the File
Transfer Protocol (FTP) server.
Shows statistics and lets you change the current configuration for the
gateway.
Alllows you to view and configure GRE settings.
Lets you view and change settings for a host on the network.
Shows HyperText Transfer Protocol (HTTP) statistics and lets you change
the current configuration and authentication settings.
Shows statistics and lets you change the current configuration and
Command mode settings of a serial line.
Shows status and lets you configure the network interface.
Lets you perform lower level network stack-specific activities.
Lets you change configuration settings for the query port.
Allows you to view and configure relay output, shows current relay output
statuses and allows you to modify display of both relays.
Lets you change current Really Simple Syndication (RSS) settings.
Shows and allows modification to the current configuration of SMS.
Shows and allows modification of the current configuration of SMTP.
Shows and allows modification of the current configuration of SNMP.
Lets you change the configuration settings for SSH server host keys, SSH
server authorized users, SSH client known hosts, and SSH client users.
Lets you upload an existing certificate or create a new self-signed
certificate.
Lets you specify the severity of events to log and the server and ports to
which the syslog should be sent.
Lets you reboot device, restore factory defaults, upload new firmware, and
change the device long and short names.
Lets you change current settings for a terminal.
Lets you change the current configuration settings for an incoming tunnel
connection.
Alllows you to view and configure Virtual IP settings.
Lets you view and configure VPN settings.
5: Configuration Using Web Manager
See
Page
91
53
85
92
109
86
47
56
83
87
67
38
111
114
80
89
94
92
92
101
105
86
119
82
70
52
54
36