Lantronix PremierWave XC HSPA+ Quick Start Manual

PremierWave® XC HSPA+ Quick Start Guide
WHAT'S
IN THE
BOX
Quick Start Guide
1 HARDWARE REVIEW
2 HARDWARE INSTALLATION
1. Insert the SIM card in the SIM compartment found at the
bottom of the PremierWave XC HSPA+ Intelligent Gateway.
Remove the screws from SIM compartment
cover.
Slide the SIM holder to the unlock position
(opposite of the LOCK arrow).
Lift the SIM holder and insert the SIM.
Make sure the SIM is oriented as shown.
Slide the SIM holder to the lock position (in
direction of the LOCK arrow). Replace the
cover.
2 x External
PremierWave XC
Antennas with
SMA Connector
RJ-45 Ethernet
Power Supply
Straight
(Actual power supply may differ
Cat5 Cable
from that depicted here.)
Ethernet
Port
Rx Div SIM Compartment
Serial 1
2. Attach the two external antennas to the device.
3. Mount or place the device securely.
4. Connect the Ethernet cable to the RJ45 port of the device.
5. Supply power to the device by using the power adapter
included the packaging.
Mounting Components:
• DIN Rail Mounting Adapter
• Cover Plates
9-30VDC
Locking Barrel
Digital
Power
I/O
Connector
Antenna
Serial 2 Reset Pin USB
Mounting Bracket
(one on each side)