Ip Address; Port Numbers; Product Information Label; Figure 2-1 Premierwave Unit Product Label - Lantronix PREMIERWAVE XC HSPA+ User Manual

IP Address

Every device connected to an IP network must have a unique IPv4 address. This address
references the specific unit.

Port Numbers

Every TCP connection and every UDP datagram is defined by a destination and source IP
address, and a destination and source port number. For example, a Telnet server commonly uses
TCP port number 23.
The following is a list of the default server port numbers running on the PremierWave XC HSPA+
intelligent gateway:
TCP Port 22: SSH Server (Command Mode configuration)

TCP Port 23: Telnet Server (Command Mode configuration)

TCP Port 80: HTTP (Web Manager Configuration)

TCP Port 21: FTP

UDP Port 30718: LDP (Lantronix Discovery Protocol) port

TCP/UDP Port 10001: Tunnel 1 (see note below)

UDP Port 1900 and TCP Port 30179: UPnP

Note: Additional TCP/UDP ports and tunnels will be available, depending on the product
type. The default numbering of each additional TCP/UDP port and corresponding tunnel
will increase sequentially (i.e., TCP/UDP Port 1000X: Tunnel X).

Product Information Label

The product information label on the unit contains the following information about the specific unit:
Part Number

International Mobile Equipment Identity

(IMEI) Number
Serial Number (MAC Address)

Country of Origin

Product Revision

Manufacturing Date Code

Part Number
Revision
Serial Number
Country of Origin
PremierWave® XC HSPA+ Intelligent Gateway User Guide

Figure 2-1 PremierWave Unit Product Label

Note: The hardware address on the label is
also the product serial number. The hardware
address on the label is the address for the
Ethernet (eth0) interface.
Data Code
IMEI Text
2: Introduction
20