Table of Contents
Advertisement
17: Management Interface Settings
Command Line Interface Settings
The Command Line Interface settings allow you to control how users connect to and interact with
the command line of the PremierWave XC HSPA+ intelligent gateway. It is possible to configure
access via the Telnet and SSH protocols, in addition to general CLI options.
Basic CLI Settings
The basic CLI settings control general CLI access and usability options.
Command Line Interface
Configuration Settings
Login Password
Enable Level Password
Quit Connect Line
Inactivity Timeout
Line Authentication
To View and Configure Basic CLI Settings
Using Web Manager
To view CLI statistics, click CLI in the menu and select Statistics.
To configure basic CLI settings, click CLI in the menu and select Configuration.
Using the CLI
To enter CLI command level: enable -> config -> cli
Using XML
Include in your file: <configgroup name="cli">
PremierWave® XC HSPA+ Intelligent Gateway User Guide
Table 17-1 CLI Configuration Settings
Description
Enter the password for the admin account. "PASS" is the default password.
Enter the password for access to the Command Mode Enable level. There is
no password by default.
Enter the Quit Connect Line string to be used to terminate a Telnet and SSH
session and resume the CLI. Type <control> before the key to be pressed
while holding down the [Ctrl] key (example: <control>L)
Set a time period in which the CLI session should disconnect if no data is
received. Enter 0 to disable. Blank the display field to restore the default.
Select to enable or disable authentication for CLI access on the .
120
Advertisement
Table of Contents
Need help?
Do you have a question about the PREMIERWAVE XC HSPA+ and is the answer not in the manual?
Questions and answers