Table of Contents
Advertisement
System Settings
The PremierWave XC HSPA+ intelligent gateway system settings allow for rebooting the device,
restoring factory defaults, uploading new firmware and updating a system's short and long name.
Note:
Anytime you reboot the unit, this operation will take some time to complete.
Please wait a minimum of 10-20 seconds after rebooting the unit before attempting to
make any subsequent connections.
System Settings
State
Current date and time
Schedule
Time (24 hour)
Interval
Reboot Device
Restore Factory Defaults Click Factory Defaults to restore the device to the original factory settings. All
Upload New Firmware
Short Name
Long Name
Submit (button)
To Reboot or Restore Factory Defaults
Using Web Manager
To access the area with options to reboot, restore to factory defaults, upload new firmware,
update the system name (long or short names) or to view the current configuration, click
System in the menu.
Using the CLI
To enter the command level: enable
Using XML
Include in your file: <configgroup name="xml import control">
PremierWave® XC HSPA+ Intelligent Gateway User Guide
Table 16-12 System Settings
Description
Click to enable or disable the reboot schedule.
Displays the current date and time.
Select the Daily or Interval schedule from the drop-down menu.
Enter the Hour and Min (minute) in 24 hour time, for the reboot time if Daily
schedule is selected.
Enter the interval number and select the interval type (Hours, Days, or
Weeks) from the drop-down menu.
Click the Reboot button to reboot the device.
configuration will be lost. The PremierWave XC HSPA+ intelligent gateway
unit automatically reboots upon setting back to the defaults.
Write the new firmware file to firmware.rom on the PremierWave unit by
clicking Choose File to browse to the new firmware file, and click Upload
button to upload the chosen file to the system. The device automatically
reboots upon the installation of new firmware. See the section,
on page
86.
Enter a short name for the system name. A maximum of 32 characters are
allowed.
Enter a long name for the system name. A maximum of 64 characters are
allowed.
Click Submit after entering the system name.
16: Maintenance and Diagnostics Settings
FTP Settings
119
Advertisement
Table of Contents
Need help?
Do you have a question about the PREMIERWAVE XC HSPA+ and is the answer not in the manual?
Questions and answers