Table of Contents
Advertisement
Protocol Stack
IP Settings (continued)
Multicast Time to Live
To Configure IP Protocol Stack Settings
Using Web Manager
To configure IP protocol settings, click Protocol Stack in the menu and select IP.
Using the CLI
To enter the command level: enable -> config -> ip
Using XML
Include in your file: <configgroup name="ip">
ICMP Settings
Protocol Stack
ICMP Settings
State
To Configure ICMP Protocol Stack Settings
Using Web Manager
To configure ICMP protocol settings, click Protocol Stack in the menu and select ICMP.
Using the CLI
To enter the command level: enable -> config -> icmp
Using XML
Include in your file: <configgroup name="icmp">
To View ICMP Protocol Stack Settings
Using Web Manager
To view ICMPv6 protocol settings, click Protocol Stack in the menu and select ICMPv6.
PremierWave® XC HSPA+ Intelligent Gateway User Guide
Description
This value fills the Time To Live in any multicast IP header. Normally this value
will be one so the packet will be blocked at the first router. It is the number of
hops allowed before a Multicast packet is discarded.
Enter the value to be greater than one to intentionally propagate multicast
packets to additional routers.
Table 16-6 ICMP Protocol Stack Settings
Description
Click to enable or disable the processing of ICMP messages. This includes
both incoming and outgoing messages.
16: Maintenance and Diagnostics Settings
112
Advertisement
Table of Contents
Need help?
Do you have a question about the PREMIERWAVE XC HSPA+ and is the answer not in the manual?