Ftp Settings; To Configure Ftp Settings; Syslog Settings; Table 12-2 Ftp Settings - Lantronix PREMIERWAVE XC HSPA+ User Manual

FTP Settings

The FTP protocol can be used to upload and download user files, and upgrade the PremierWave
XC HSPA+ intelligent gateway firmware. A configurable option is provided to enable or disable
access via this protocol.
FTP Settings
State

To Configure FTP Settings

Using Web Manager
To configure FTP and view FTP statistics, click FTP in the menu.

Using the CLI
To enter the FTP command level: enable -> config -> ftp

Using XML
Include in your file:


Syslog Settings

The Syslog information shows the current configuration and statistics of the syslog. Here you can
configure the syslog host and the severity of the events to log.
Note: The system log is always saved to local storage, but it is not retained through
reboots unless diagnostics logging to the file system is enabled. Saving the system log to
a server that supports remote logging services (see RFC 3164) allows the administrator to
save the complete system log history. The default port is 514.
Syslog Settings
State
Host
Remote Port
PremierWave® XC HSPA+ Intelligent Gateway User Guide
FTP Settings
Table 12-2
Description
Select to enable or disable the FTP server:
Enabled (default)

Disabled

<configgroup name="ftp server">

Table 12-3 Syslog Settings

Description
Select to enable or disable the syslog:
Enabled

Disabled (default)

Enter the IP address of the remote server to which system logs are sent for storage.
Enter the number of the port on the remote server that supports logging services.
The default is 514.
12: Network Services
86