Discovery; To Configure Discovery; Table 12-8 Discovery Settings - Lantronix PREMIERWAVE XC HSPA+ User Manual

Using Web Manager
To configure SNMP, click SNMP in the menu.

Using the CLI
To enter the SNMP command level: enable -> config -> snmp

Using XML
Include in your file: <configgroup name="snmp">


Discovery

The current statistics and configuration options for device discovery, including UPnP query port
are available for the PremierWave XC HSPA+ intelligent gateway.
Discovery
Query Port Server
State
UPnP Server State
UPnP Server Port

To Configure Discovery

Note: If you are utilizing Windows XP, make sure to select UPnP User Interface under
Windows Components > Networking Services > Details before setting up the
PremierWave device to utilize Discovery.
Using Web Manager
To access the area with options to configure discovery and view current discovery statistics,

click Discovery in the menu.
Using the CLI
To enter the command level: enable -> config -> discovery

Using XML
Include in your file: <configgroup name="discovery">

PremierWave® XC HSPA+ Intelligent Gateway User Guide

Table 12-8 Discovery Settings

Description
Select to enable or disable the query port server from responding to autodiscovery
messages on port 0x77FE.
Select to enable or disable the UPnP server from discovering devices in Windows
network places.
Update the UPnP server port. Leaving this field blank will restore the default
settings.
12: Network Services
91