Table of Contents
Advertisement
RSS Settings
View
Clear
To Configure RSS Settings
Using Web Manager
To configure RSS and view current RSS statistics, click RSS in the menu.
Using the CLI
To enter the RSS command level: enable -> config -> rss
Using XML
Include in your file: <configgroup name="rss">
SNMP Settings
Simple Network Management Protocol (SNMP) settings may be viewed and configured in this
section.
SNMP Settings
State
Version
Read Community
Write Community
System Contact
System Name
System Description
System Location
Lantronix MIB File
MIB File
To Configure SNMP Settings
PremierWave® XC HSPA+ Intelligent Gateway User Guide
Description
Click the button to view RSS feeds.
Click the button to clear RSS feed data.
Table 12-7 SNMP Settings
Description
Select to enable or disable the SNMP agent state.
Select the SNMP version used by the SNMP agent.
Specify the read community used by the agent (defaults to public community).
Specify the write community used by the agent (defaults to private community).
Specify the system contact.
Update the system name, as necessary. The default system name is "".
Update the system description, as necessary. The default system information
includes the manufacturer name, model name, version and the serial number of the
device.
Specify a system location for the SNMP setting.
Click the Lantronix MIB file name to save and load it into the MIB browser and trap
receiver. This is the base MIB file for Lantronix products. Load or compile this file
first.
Click the MIB file name to save and load it into the MIB browser and trap receiver.
This is the product specific MIB file. Load or compile this after the Lantronix MIB
File.
12: Network Services
90
Advertisement
Table of Contents
Need help?
Do you have a question about the PREMIERWAVE XC HSPA+ and is the answer not in the manual?
Questions and answers