Static Routes; To Configure Gateway Static Route Settings; Table 6-6 Adding A New Static Route - Lantronix PremierWave XC HSPA+ User Manual

Using the CLI
To enter the gateway command level: enable -> config -> gateway -> port

forwarding rule <number>
Using XML
Include in your file: <configgroup name="gateway"> <configitem name="port

forwarding" instance="<number>">

Static Routes

Allows the user to add routes to the device routing table.
Static Route Settings
Enabled
Delete
Name
Route
Applied
Adding New Static Route
Settings
Name
Network
Gateway
Interface
Metric

To Configure Gateway Static Route Settings

Using Web Manager
To modify gateway static route information, click Gateway on the menu and select

Configuration > Static Routes.
Using the CLI
To enter the gateway command level: enable -> config -> gateway -> static

route <number>
Using XML
Include in your file: <configgroup name ="gateway"> <configitem name="static

routes" instance="<number>">
PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT
Description
Enables the static route
Deletes the static route
User friendly name for the route. Click on the [Edit] icon to make changes.
Network or Host for the route
If the route was successfully applied. Routing table updates require a
reboot and route needs to be valid as per other device configurables.

Table 6-6 Adding a New Static Route

Description
User friendly name for the route
Network or Host for the route
Gateway for the route
Interface for the route
Priority for the route. Lower metric means higher priority.
PRELIMINARY DRAFT
6: Network Settings
39