To Ping A Remote Host; Traceroute; To Perform A Traceroute; Log - Lantronix PremierWave XC HSPA+ User Manual

To Ping a Remote Host

Using Web Manager
To ping a Remote Host, click Diagnostics in the menu and select Ping.

Using the CLI
To enter the command level: enable, ping <host> <count> <timeout>

Using XML
Not applicable.


Traceroute

Here you can trace a packet from the PremierWave to an Internet host, showing how many hops
the packet requires to reach the host and how long each hop takes. If you visit a web site whose
pages appear slowly, you can use traceroute to determine where the longest delays are occurring.
Diagnostics:
Traceroute Settings
Host
Protocol

To Perform a Traceroute

Using Web Manager
To perform a Traceroute, click Diagnostics in the menu and select Traceroute.

Using the CLI
To enter the command level: enable, trace route <host> <port>

Using XML
Not applicable.


Log

Diagnostics: Log
Output
PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT

Table 13-9 Traceroute Settings

Description
Enter the IP address or DNS hostname. This address is used to show the path
between it and the PremierWave when issuing the traceroute command.
Specify the traceroute protocol.

Table 13-10 Log Settings

Description
Select a diagnostic log output type:
 Disable - Turn off the login feature.
 Filesystem - Directs logging to /log.txt.Line (1or, 2, ) - Directs logging to the
selected serial line.
PRELIMINARY DRAFT
13: Maintenance and Diagnostics Settings
79