To Transfer Or Modify Filesystem Files; Protocol Stack Settings; Ip Settings; To Configure Ip Network Stack Settings - Lantronix PremierWave XC HSPA+ User Manual

To Transfer or Modify Filesystem Files

Using Web Manager
To create a new file or directory, upload an existing file, copy or move a file, click Filesystem

in the menu and select Browse.
Using the CLI
To enter the Filesystem command level:

Using XML
Not applicable.


Protocol Stack Settings

There are various low level network stack specific items that are available for configuration. This
includes settings related to IP, ICMP, ARP and SMTP, which are described in the sections below.

IP Settings

Protocol Stack
IP Settings
IP Time to Live
Multicast Time to Live

To Configure IP Network Stack Settings

Using Web Manager
To configure IP protocol settings, click Protocol Stack in the menu and select IP.

Using the CLI
To enter the command level: enable -> config -> ip

Using XML
Include in your file: <configgroup name="ip">

PremierWave XC HSPA+ User Guide
PRELIMINARY DRAFT
enable -> filesystem
IP Network Stack Settings
Table 13-4
Description
This value typically fills the Time To Live in the IP header.
Enter the number of hops to be transmitted before the packet is discarded.
This value fills the Time To Live in any multicast IP header. Normally this value
will be one so the packet will be blocked at the first router. It is the number of
hops allowed before a Multicast packet is discarded.
Enter the value to be greater than one to intentionally propagate multicast
packets to additional routers.
PRELIMINARY DRAFT
13: Maintenance and Diagnostics Settings
75