Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
DO NOT OPERATE THIS DEVICE WITH OPEN COVER
•
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety cable.
•
Never stand directly below the device when mounting, removing or servicing the fixture.
•
The operator has to make sure the safety and technical installations are approved by an expert
before taking and using this fixture in the field for the first time.
•
These installations must be inspected by a skilled person once a year.
•
Overhead mounting requires extensive experience, including amongst others calculating working
load limits, installation material being used, and periodic safety inspection of all installation material
and the device. If you lack these qualifications, do not attempt the installation yourself. Improper
installation can result in serious bodily injury.
RIGGING THE DEVICE
PLEASE CONSIDER THE GB7000.1-2015, GB7000.217-2008 AND THE
OTHER RESPECTIVE NATIONAL NORMS DURING THE INSTALLATION.
THE INSTALLATION MUST ONLY BE CARRIED OUT BY A QUALIFIED
PERSON.
•
The structure on which the device is rigged must be able to support 10 times the weight of the
device for 1 hour without any critical deformation occurring.
•
The installation must always be secured with a secondary safety attachment, e.g. the included
appropriate safety cable.
•
Never stand directly below the device when rigging, de-rigging or maintaining the device.
•
All electrical connections should be approved by a qualified electrician prior to using the product.
•
When the device is permanently installed these installations have to be approved by a qualified
person once a year.
•
Overhead rigging requires extensive experience, including (but not limited to) calculating working
load limits, specifying installation/ rigging materials, and periodic safety inspection of all installation
material as well as the device. If you lack these qualifications, do not attempt the rigging of this
device yourself. Improper installation/ rigging can result in serious bodily injury.
•
Before rigging make sure that the installation area can hold a minimum point load of 10 times the
device's weight.
SolaHyBeam 2000 User Manual
CAUTION!
CAUTION!
19
v1.3
Advertisement
Table of Contents
