Table of Contents
Advertisement
Installation Instructions
The installation must always be secured with a secondary safety attachment. An appropriate safety
l
cable is supplied.
A safety factor of 10:1 shall be required when fixtures are hung
l
Use of third party clamps are permitted, but they should comply with the local jurisdiction and be
l
approved by the Authority Having Jurisdiction.
A supportive and stable surface must be used when the fixtures are placed on the feet.
l
The operating temperature range for this fixture is 0 - 45 degrees Celsius. Do not operate the fixture
l
outside of this range.
Never stand directly below the installed fixture when mounting, removing, or servicing.
l
All safety and technical aspects of fixture installation shall be approved by a qualified person before
l
operation.
The installation must be regularly inspected by a qualified person.
l
Overhead rigging must be performed by qualified personnel.
l
Attachment Instructions
CAUTION:
Jurisdiction (AHJ). The installation must only be carried out by a qualified person.
Follow all local codes and recommended practices by the Authority Having
13
Advertisement
Table of Contents
