Table of Contents
Advertisement
3. Tap the [Up] or [Down] button until the "ResetDefault" option displays, then press [Enter]. The "ResetDe-
fault" menu displays.
4. Use the [Up] or [Down] buttons to modify the selection.
5. Press [Enter] to commit to the change. When set to ON, the unit will reset to factory defaults, and return
the display to the default status screen. To exit without saving the change, press the [MODE/ESC] button
to return to the previous menu.
Test Menu
Home
This menu provides access to re-home the fixture or its mechanical features.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Test" option displays, then press [Enter]. The "Test" menu dis-
plays.
3. Tap the [Up] or [Down] button until the "Home" option displays, then press [Enter]. The "Home" menu dis-
plays.
4. Use the [Up] or [Down] buttons to modify the selection ("All" (all features in the fixture will re-home),
"Pan&Tilt" (re-homes only the pan and tilt), "Colors", "Gobos", and "Others", etc.).
5. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Self Test
This menu provides access to run a self test program on the fixture.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Test" option displays, then press [Enter]. The "Test" menu dis-
plays.
3. Tap the [Up] or [Down] button until the "Self Test" option displays, then press [Enter]. The "Self Test" menu
displays and shows "Running" and the fixture will automatically begin a self test procedure, testing each
of the functions. This display will remain until the [MODE/ESC] button is pressed, which will return the dis-
play to the previous menu.
Test Channel
This menu provides access to automatically run a self test on each fixture channel individually.
34
Advertisement
Table of Contents
