User's Manual
51.7
Control Network Parameters
51.7.1 IP Group, Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 5 1-28: Proxy, Registration and Authentication SIP Parameters
Parameter
IP Group Table
Web: IP Group Table
EMS: Endpoints > IP Group
[IPGroup]
Authentication per Port Table
Web: Authentication Table
EMS: SIP Endpoints >
Authentication
[Authentication]
Version 6.6
This table configures IP Groups.
The ini file format of this parameter is as follows:
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode,
IPGroup_SRD, IPGroup_MediaRealm,
IPGroup_ClassifyByProxySet, IPGroup_ProfileId,
IPGroup_MaxNumOfRegUsers, IPGroup_InboundManSet,
IPGroup_OutboundManSet, IPGroup_RegistrationMode,
IPGroup_AuthenticationMode, IPGroup_MethodList,
IPGroup_EnableSBCClientForking, IPGroup_SourceUriInput,
IPGroup_DestUriInput, IPGroup_ContactName;
[/IPGroup]
Notes:
For this parameter to take effect, a device reset is required.
For a description of this table, see 'Configuring IP Groups'
on page 206.
This table parameter defines a user name and password for
authenticating each device port. The format of this parameter is
as follows:
[Authentication]
FORMAT Authentication_Index = Authentication_UserId,
Authentication_UserPassword, Authentication_Module,
Authentication_Port;
[\Authentication]
Where,
Module = Module number, where 1 denotes the module in
Slot 1
Port = Port number, where 1 denotes the Port 1 of the
module
For example:
Authentication 1 = lee,1552,1,2; (user name "lee" with
password 1552 for authenticating Port 2 of Module 1)
Notes:
The indexing of this parameter starts at 0.
679
5 1. Configuration Parameters Reference
Description
Mediant 800B GW & E-SBC