Power On; Service Diagnostics - Keysight N9923A FieldFox User Manual

 Press

Power ON

When the FieldFox is without a power source, this setting allows the FieldFox to
power ON as soon as a charged battery or the DC Adapter is inserted without
pressing the power button.
How to set Power ON
 Press System 7
 Then
 Then
 Then choose from the following:


Service Diagnostics

 The Service diagnostics menu is generally used to display service-related
System Information
The System information table shows important information about your FieldFox. The
following is the most useful information:
 Model Number – FieldFox model
 Serial Number – Identification number of your FieldFox
 Firmware Release – The currently installed version of software. Check to see if you
 Network Identity – The network name and current IP address of your FieldFox.
 Reflectometer Cal - The Factory (CalReady) Calibration shows the date and time
Error Log
The Error Log shows the information that has appeared on the FieldFox screen. The
most recent information is at the top of the table.
Press
Battery
Learn about this table on page 146.
Internal Temperatures
Learn all about this table and the importance of the internal FieldFox temperatures
on page 14.
144
when finished.
Done Edit
System Configuration
Power ON
The FieldFox will power ON when a charged battery or the DC Adapter is
Auto
o
inserted.
The FieldFox will power ON only when the power button is pressed.
Manual
information. To access these menu items, press System 7 then
Diagnostics.
have the latest firmware at:
that the factory cal was performed for each test port and the Thru connection. The
format is P1 <date time>, P2 <date time>, P1-P2 <date time>. The factory
calibration is updated when you send your FieldFox to Keysight for Instrument
Calibration. Learn more on page 163.
to erase this information.
Clear Errors
www.keysight.com/find/fieldfoxsupport
Service
FieldFox User's Guide