Fuel Pump Test (Tc) - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
Workshop Manual Ed. 07-2012
FUEL INJECTION SYSTEM
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Fuel pump test (TC)

Remove the pump as described in Section "E".
A: fuel reserve sensor
Make sure there is no fuel left in the sensor and then set the meter to the
"Impedance" scale and measure across the BLUE and WHITE wires. Cor-
rect value is as follows: 1.3 KOhm (+/- 10%) at 20 °C.
B: pump operation
Connect the RED (+) and BLACK (-) wires to a power supply unit with con-
stant 12V output and make sure that the pump runs.
Never keep the pump connected to the power supply unit for more
than 3 seconds in a row.
S.6