Panasonic KX-NS1000 Pc Programming Manual page 498

10.9 PBX Configuration—[2-9] System—System Options
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
CODEC—Network CODEC
Selects the codec type for ISDN lines.
Value Range
A-Law, Mu-Law
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
ISDN en Bloc Dial—[#] as End of Dial for en Bloc mode
Specifies whether to automatically send "#" as an end code when dialling to an ISDN line; if used as the end
code, "#" will not be dialled out as part of a number even when the "#" key is pressed.
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—ISDN CO—
Call Type
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—CO Setting—
Call Type
Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
Redial—Automatic Redial when No Answer (ISDN)
Selects whether Automatic Redial to an ISDN line is performed when the called party does not answer within
a pre-programmed time period.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—
498 PC Programming Manual
Automatic Redial—Redial Call Ring Duration
ISDN Outgoing
ISDN Outgoing