Panasonic KX-NS1000 Pc Programming Manual page 344

9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Max Receive Time
Specifies the maximum number of Caller ID series that are sent from the network.
Value Range
0 (no limit), 1, 2, 3
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (FSK) Carrier Detection
Enables the PBX to detect the carrier when receiving Caller ID. To enable this setting,
Signalling on this screen should be set to FSK.
Value Range
Disable, Enable
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (FSK) END Detection
Selects the method used to detect the end of Caller ID information.
Value Range
Length + Timer, Timer
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
344 PC Programming Manual
Caller ID—Caller ID