Panasonic KX-NS1000 Pc Programming Manual page 762

18.4 PBX Configuration—[10-4] CO & Incoming Call—MSN Table
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
18.4 PBX Configuration—[10-4] CO & Incoming Call—MSN Table
PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Feature Guide References
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending on the time
of day.
Value Range
1–32
Maintenance Console Location
18.4 PBX Configuration—[10-4] CO & Incoming Call—MSN Table
PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
10.4 PBX Configuration—[2-4] System—Week Table
Feature Guide References
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
UM Service Group No.
Specifies the Service Group number sent to the Unified Messaging system when the incoming call destination
is the floating extension number of a UM group.
The Service Group number is used to allow the Unified Messaging system to send the applicable greeting
message to the caller.
Value Range
None, 1–64
Maintenance Console Location
18.4 PBX Configuration—[10-4] CO & Incoming Call—MSN Table
762 PC Programming Manual