Panasonic KX-NS1000 Pc Programming Manual page 236

9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
Maintenance Console Location
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
NAT - Keep Alive Packet Sending Ability
Specifies whether to send Keep Alive packets in order to maintain the NAT binding information. This setting
may be compulsory depending on the network conditions.
Value Range
Disable, Enable
Maintenance Console Location
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
NAT - Keep Alive Packet Type
Specifies the type of Keep Alive packets to be sent out.
Value Range
Blank UDP, None
Maintenance Console Location
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
NAT - Keep Alive Packet Sending Interval
Specifies the interval time until the next Keep Alive packet is sent.
Note
This interval must be shorter than the NAT binding time of the router. The default value is appropriate in
most cases.
Value Range
1–60 s
Maintenance Console Location
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
NAT - Fixed Global IP Address
Specifies the global IP address of the router with NAT enabled. This setting is compulsory if Fixed IP Addr.
is selected in NAT Traversal.
Value Range
1.0.0.0–223.255.255.255
Maintenance Console Location
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
236 PC Programming Manual