Panasonic KX-NS1000 Pc Programming Manual page 228

9.5.3 PBX Configuration—[1-1] Configuration—Slot—Site Property—NSVM
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
CNG Signal Fixation Detection Pattern
Specifies the CNG signal pattern to be detected before the PBX proceeds the fax operation.
Value Range
OFF, ON
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Maximum Silence Time
Specifies the length of time of silence that the PBX will detect as the end of a call.
Value Range
1000–60000 (ms)
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Maximum Continuous Tone Time
Specifies the length of time of a continuous tone that the PBX will detect as the end of a call.
Value Range
1000–60000 (ms)
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Unique Cyclic Tone Detection
Specifies whether the system will detect the end of a call when there is a unique cyclic tone.
Value Range
Disable, Enable
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Maximum Cyclic Tone Time
Specifies the length of time of a continuing cyclic tone that the PBX will detect as the end of a call.
228 PC Programming Manual