Panasonic KX-NS1000 Pc Programming Manual page 811

Follow the steps below to edit list members.
1.
Click Edit for a List Members item.
2.
Under Subscribers To Add, click the checkbox in No. for each mailbox to add, referring to the mailbox
numbers and mailbox owners' names.
3.
Click Add.
4.
Click OK.
Follow the steps below to remove members from a list.
1.
Click Edit for Personal Distribution Lists (1–4) Members item.
2.
Under Distribution, click the checkbox in No. for each mailbox to add, referring to the mailbox numbers
and mailbox owners' names.
3.
Click Delete.
4.
Click OK.
Value Range
Max. 40 mailboxes per list
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Personal Distribution List
Feature Guide References
3.2.2.17 Group Distribution Lists
Remote Call/Automatic Login/Direct Service
This tab contains programming items for Remote Call Forwarding, Automatic Login, and Direct Service
settings.
Remote Call Telephone Number 1, 2
Specifies the telephone numbers of destinations to which callers are forwarded when the subscriber sets
Remote Call Forwarding. 2 telephone numbers can be specified per mailbox. Telephone numbers can contain
the digits "0–9" and " ". These telephone numbers should begin with a trunk access number.
Note
Class of Service programming determines if the subscriber is able to use this feature.
Value Range
Max. 32 digits (consisting of 0–9 and " ")
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—
Feature Guide References
3.2.2.29 Remote Call Forwarding Set
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
Call Transfer to Outside
PC Programming Manual 811