Panasonic KX-NS1000 Pc Programming Manual page 896

24.4 UM Configuration—[5-4] System Parameters—Parameters
Dialling Parameters—Pause Time for "," (100-9900 ms, *100 ms)
Specifies the pause time for "," used in call sequences.
Value Range
100–9900 ms, in units of 100 ms
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Dialling Parameters—Pause Time for ";" (100-9900 ms, *100 ms)
Specifies the pause time for ";" used in call sequences.
Value Range
100–9900 ms, in units of 100 ms
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Dialling Parameters—Outside Call Setup Sequence (Up to 16 digits / [0-9 * # D
R F T , ;])
Specifies the sequence of codes used by the system when calling a trunk. You can set a maximum of 16 digits.
The default value is "T". "T" indicates that the system will dial the telephone number only after detecting a dial
tone.
Example:
9, = (9) – 1 s wait – dial telephone number. "9" is the trunk access number.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause (default 1 s)
; : Dial Pause (default 3 s)
0–9, , #: Dial Code
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Message Waiting Notification—System Callback No. (Up to 32 digits)
Specifies a callback number to be displayed with text reports of messages waiting notifications. The system
callback number is displayed when the caller does not enter his or her telephone number when prompted by
the system.
Value Range
Max. 32 digits
896 PC Programming Manual
, # and special codes