Panasonic KX-NS1000 Pc Programming Manual page 778

19.1 PBX Configuration—[11-1] Maintenance—Main
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
External Modem Command—Automatic Initialisation
Specifies the command to automatically initialise an external modem when it is plugged into the Serial Interface
(RS-232C) port of the PBX.
Value Range
Max. 30 characters
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Maintenance
Local Alarm Display—Extension 1, Extension 2
Specifies the extension numbers of PTs that will be notified by the PBX about local alarms. When the PBX
detects a PBX error, the System Alarm button on the PT turns on red. When this button is pressed, the display
will show the error number, and the button light will turn off automatically.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
5.6.4 Local Alarm Information
Daily Test Start Time—Set
Enables the daily self check of the PBX for local alarm and error log.
Value Range
Disable, Enable
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Guide References
5.6.4 Local Alarm Information
778 PC Programming Manual