Panasonic KX-NS1000 Pc Programming Manual page 895

Dialling Parameters/MSW Notification
Dialling Parameters—Number of Digits to Access Outside Line (0-8 digits)
This parameter should match the number of digits of the trunk access number required by the PBX when
making outside calls.
Example:
If the PBX requires callers to dial "9" to access a trunk, this parameter should be set as "1". This enables the
system to recognise that an outgoing call setup sequence is completed once the initial "9" has been dialled
(9-123-4567).
Value Range
0–8 digits
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Dialling Parameters—Call Transfer No Answer Time (10-60 s)
Specifies the length of time that the system waits before retrieving the transferred call when there is no answer
at the destination extension.
Note
Make sure that the duration of Call Transfer No Answer Time is longer than the duration of Call Forwarding
No Answer Time at the PBX. Otherwise, the PBX may forward the call immediately to the extension's
Intercept Routing destination according to PBX programming, rather than return the call to the system.
Value Range
10–60 s
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
PC Programming Manual References
12.1 PBX Configuration—[4-1] Extension—Wired Extension—
12.2 PBX Configuration—[4-2] Extension—Portable Station—
Dialling Parameters—Outgoing Call No Answer Time (10-90 s)
Specifies the length of time that the system waits before concluding that there is no answer at the outside
number called.
Value Range
10–90 s
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
24.4 UM Configuration—[5-4] System Parameters—Parameters
FWD No Answer Time
FWD No Answer Time
PC Programming Manual 895