Panasonic KX-NS1000 Pc Programming Manual page 804

20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
Value Range
Yes, No
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Guide References
3.2.1.29 Message Waiting Notification—E-mail Device
E-mail/Text Message Device—Device No. 1, 2, 3—Attach Fax File
Specifies whether to attach a fax image file of fax messages to the notification e-mail.
Value Range
Yes, No
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Guide References
3.2.1.29 Message Waiting Notification—E-mail Device
E-mail/Text Message Device—Device No. 1, 2, 3—Use Mode
Specifies if and how each device is used for message notification.
If Scheduled is selected here, follow the steps below to specify the time frame:
1.
Click a day (Sunday – Saturday) tab.
2.
Click Enable Time Frame No. 1 or 2.
3.
Enter the start and end times in the Start At (HH:MM) and End At (HH:MM) fields.
4.
To specify if sent voice message or fax image files are deleted from the Unified Message system after they
are sent by e-mail, select "Yes" for Delete After Send (Voice File) or Delete After Send (Fax File).
5.
Repeat steps 1 to 4 for each day to be programmed, and then click OK.
Value Range
Not use: The selected device is not used for message notification.
Continuously: The device is called whenever a message is recorded in the mailbox. If Only Urgent
Messages is set to "Yes", the device is called whenever an urgent message is recorded in the mailbox.
Scheduled: The selected device is called only during the selected times.
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Guide References
3.2.1.29 Message Waiting Notification—E-mail Device
804 PC Programming Manual