Tool-Bri Automatic Configuration - Panasonic KX-NS1000 Pc Programming Manual

6.2 Tool—BRI Automatic Configuration
6.2 Tool—BRI Automatic Configuration
Automatically configures the network settings of the BRI card.
This option is only available at Installer level in On-line mode.
This tool automatically inputs values into the fields
Mode, on the Network tab of the 9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property -
BRI Port screen.
Note
•
To use this tool, the card to be configured must be pre-set to OUS status. For more details, see
2.1.6 Card Status.
•
At any time on this screen, you can click Cancel to return to the previous screen without saving.
To configure the BRI card
1.
In Check, select the card, and then click OK.
2.
Click Execute.
The results of the automatic configuration will be displayed.
3.
Click the Check Box cell for the ports that have been configured.
4.
Click Data Apply to save these results to the BRI card.
92 PC Programming Manual
L1 Mode, L2 Mode, Access Mode, and TEI